Unlocking and IMEI repairing Motorola v6x,70 and T280

Clips are tested on V66, V60, V70,T280.

Change IMEI: for example?446378-30-xxxxxx-4

Spec: 9 x 5.5 x 2cm No computer

Models: V60,66,70,T280,720

User Manual PATRIOT” platform mobile types are:V60, V66, V70, T280,720

Prepair your PATRIOT” clip to work:

• 1. Connect one 9v battery to the Patriot” clip.
• 2. The blue LED will blink 3x, it shows that the clip is working and ready to use
• 3. The power on state is NOT indicated, this means, after the 3x blinking the LED will be off.
• 4. Now the PATRIOT” clip is in IDLE mode and ready to work.

Usage of the PATRIOT” CLIP:

• 1. Phone must be switched ON!
• 2. Power on your PATRIOT” CLIP. (not any special power on switch, just connect the battery)
• 3. If you wish to just to remove the SP lock, than put the switch in position “1”
• 4. Connect the clip with the phone and press the RED button and wait…
• 5. After unlock done, blue LED will blink 1 x (if LED blinks 3x something wrong in clip!!!)

6. READY USER LOCK REMOVAL IS NOT SUPPORTED IN THIS VERSION IF YOU WISH TO REPAIR IMEI, JUST PUT THE SWITCH IN POSITION “2” AND REPEAT THE PROCEDURE STARTING FROM STEP 1-6 !

If the phone is still NOT UNLOCKED and it was a handset which was before tried to be unlocked by partial flashing, the phone is still locked, but the network code is after you have used the clip “112345678”

ВОПРОСЫ?